Push Switch Manufacturer – PCB Mount & Panel Mount Series (Momentary / Self‑Locking / IP67)
Vistar Electronics supplies a complete range of push switches – momentary and self-locking (latching) types with PCB and panel mount options. SMT/DIP/right‑angle/vertical termination. Ratings up to 5A/250VAC, mechanical life up to 100,000 cycles. IP67 waterproof series available. RoHS 3 & REACH compliant. Free samples.
✅ SMT / DIP / Right‑Angle / Panel Mount
✅ 3A–5A/250VAC
✅ 100,000 Mechanical Cycles
✅ IP67 Waterproof Optional
| Parameter | Standard Series (Momentary) | Self‑Locking Series | IP67 Waterproof Series |
|---|---|---|---|
| Operating Type | Momentary (spring‑return) | Self‑locking (latching, push‑on/off) | Momentary / Self‑locking |
| Circuit Configuration | SPST / SPDT | SPST / SPDT | SPST / SPDT |
| Contact Logic | N.O. (Normally Open) | N.O. or N.C. | N.O. or N.C. |
| Current Rating | 0.5A – 5A | 0.5A – 3A | 3A – 5A |
| Voltage Rating | 12V DC – 250V AC | 12V DC – 125V AC | 12V DC – 250V AC |
| Contact Resistance | ≤ 100mΩ (initial) | ≤ 100mΩ (initial) | ≤ 100mΩ (initial) |
| Insulation Resistance | ≥ 100MΩ at 100V DC | ||
| Dielectric Strength | 500V – 1500V AC for 1 minute | ||
| Mechanical Life | 50,000 – 100,000 cycles | 50,000 – 100,000 cycles | 50,000 – 100,000 cycles |
| Industry Benchmarks: CUI Devices push-pull switches feature an operating force of 300–770 gf; Knitter-Switch contact ratings adhere to standards for silver/gold-plated versions, with a contact resistance of up to 200 mΩ. | |||
| Electrical Life | 50,000 cycles | 25,000 – 50,000 cycles | 50,000 cycles |
| Operating Temperature | -40°C to +85°C (industrial grade) | ||
| Ingress Protection | — | — | IP67 (dust‑tight, water‑resistant) |
| Termination Styles | DIP through‑hole, SMT, right‑angle, vertical, solder lug, quick connect | ||
| Actuator / Button Options | Flat, domed, raised, illuminated, colour‑custom, anti‑vandal metal | ||
| Housing Material | PBT / LCP / PA9T, UL94‑V0 | ||
| Contact Material | Phosphor Bronze with Gold / Silver Plating | ||
| Compliance | RoHS 3, REACH, ISO 9001:2015 | ||
Latching Push Switches
5.8mm push switch non-lock
Des: Push button switch 5.8mm*5.8mm push switch non-lock 3pin dip right anglePart No: PB-22E69Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Non-LockOperating…
5.8mm Push switch non-locking dpdt
Des: 5.8mm Push switch non-locking dpdt pushbutton switch 6 pin DIP vertical Part No: PB-22E70Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
5.8x5.8 Push switch unlock DIP 3p
Des: 5.8×5.8 Push switch unlock 3pin DIP push-button switch right angelPart No: PB-12E745Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
6 pin DIP 2p2t Push switch self-lock
Des: 6 pin dual raw DIP PCB Push switch self-lock 5.8*5.8 pushbutton switchesPart No: PB-22E601Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
6 pin self lock push switch 5.8*5.8mm
Des: 6 pin Pushbutton switch 5.8*5.8mm self lock push switch smd verticalPart No: PB-22E60GSpecification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-LockOperating…
6 pin Self-locking switch 5.8x5.8
Des: Self-locking switch 5.8×5.8 Pushbutton switch 2P2T 6 pin push switches DIP vertical Part No: PB-22E60Specification:Rating: 0.1A/0.2A, DC 12VOperating…
8mm non-lock push switch 2p2t
Des: 8*8 non-lock push switch 2p2t 8mmpushbutton switch 6pin DIP verticalPart No: PB-22E28Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
Self locking Pushbutton switch DIP 6pin
Des: 6pin double row Self locking Pushbutton switch DIP Vertical 8.5*8.5 push switchesPart No: PB-22E06 / PB-22E16Specification:Rating: 0.1A/0.2A, DC…
Self-locking push switch 5.8x5.8
Des: 3 pin Self-locking push switch 5.8×5.8 switch push dpdt dip horizontal 90degreePart No: PB-22E68Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
SPST (1P1T) Push Switches
DPDT (2P2T) Push Switches
5.8mm Push switch non-locking dpdt
Des: 5.8mm Push switch non-locking dpdt pushbutton switch 6 pin DIP vertical Part No: PB-22E70Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
5.8X5.8 push switch 2P2T SMT 6pin
Des: 5.8X5.8 push switch 2P2T SMT 6pin self lock push switchPart No: PB-22E60PM-ESpecification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
6 pin DIP 2p2t Push switch self-lock
Des: 6 pin dual raw DIP PCB Push switch self-lock 5.8*5.8 pushbutton switchesPart No: PB-22E601Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
8mm non-lock push switch 2p2t
Des: 8*8 non-lock push switch 2p2t 8mmpushbutton switch 6pin DIP verticalPart No: PB-22E28Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
8x8 Pushbutton switch DPDT
Des: 8×8 Pushbutton switch 2P2T 6 pin push switch DIP verticalPart No: PB-22E08Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
5×5mm Push Switches
5.8X5.8 push switch 2P2T SMT 6pin
Des: 5.8X5.8 push switch 2P2T SMT 6pin self lock push switchPart No: PB-22E60PM-ESpecification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
5.8x5.8 Push switch unlock DIP 3p
Des: 5.8×5.8 Push switch unlock 3pin DIP push-button switch right angelPart No: PB-12E745Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
6 pin self lock push switch 5.8*5.8mm
Des: 6 pin Pushbutton switch 5.8*5.8mm self lock push switch smd verticalPart No: PB-22E60GSpecification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-LockOperating…
6 pin Self-locking switch 5.8x5.8
Des: Self-locking switch 5.8×5.8 Pushbutton switch 2P2T 6 pin push switches DIP vertical Part No: PB-22E60Specification:Rating: 0.1A/0.2A, DC 12VOperating…
6Pin Push switch 5.8*5.8*7.3
Des: 6Pin Push switch 5.8*5.8*7.3 with square head dpdt dip verticalPart No: PB-22E65Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode: Self-Lock &…
Self-locking push switch 5.8x5.8
Des: 3 pin Self-locking push switch 5.8×5.8 switch push dpdt dip horizontal 90degreePart No: PB-22E68Specification:Rating: 0.1A/0.2A, DC 12VOperating Mode:…
Vertical Push switch 5.8x5.8
Des: 6 pin Push-button switch 2p2t dip vertical push switch 5.8×5.8 with square head 180 degreePart No: PB-22E63Specification:Rating: 0.1A/0.2A,…
Momentary & Self‑Locking Push Switch Options
Momentary (spring‑return) switches close the circuit only while pressed — ideal for keypads, doorbells, and industrial start buttons. Self‑locking (latching) push switches maintain the actuated state (push‑on, push‑off) — perfect for power ON/OFF controls, equipment mode selection, and lighting switches.
Multiple Circuit Configurations – SPST / SPDT / DPDT
Standard SPST‑NO and SPST‑NC configurations for simple on/off control, SPDT for single‑pole changeover circuits, and DPDT for dual independent switching paths. Supports both normally‑open (N.O.) and normally‑closed (N.C.) contact logic.
Wide Current & Voltage Range – 0.5A to 5A / 250VAC
Standard series rated at 3A–5A/250VAC for power switching (appliances, motors), signal‑grade variants at 50mA/12VDC for logic‑level control (microcontrollers, PLC inputs). Hybrid power‑signal designs available for mixed applications.
Multiple Termination Styles – DIP / SMT / Right‑Angle / Vertical
DIP through‑hole for maximum mechanical retention and wave soldering. SMT (tape‑and‑reel) for automated pick‑and‑place assembly. Right‑angle and vertical orientations for edge‑mount PCB ports and panel‑interfaced enclosures.
IP67 Waterproof & Panel‑Mount Options
IP67 rated push switches with silicone sealing gaskets — dust‑tight and resistant to temporary water immersion (1m depth). Ideal for outdoor industrial controls, marine electronics, medical devices, and EV chargers.
High Mechanical & Electrical Durability
Momentary series rated up to 100,000 mechanical cycles, self‑locking series rated 50,000–100,000 cycles. Gold‑plated or silver contacts with contact resistance ≤ 100mΩ, insulation resistance ≥ 100MΩ.
Wide Operating Temperature – Industrial & Outdoor Ready
Standard series operates from -40°C to +85°C, with extended options up to +105°C for high‑temperature environments. Performance validated through thermal cycling and humidity testing per IEC 60068 standards.
RoHS 3, REACH & ISO 9001:2015 Certified
All Vistar push switches are manufactured under ISO 9001:2015 and comply with RoHS 3 (EU Directive 2015/863) and REACH SVHC regulations. Full compliance certificates and test reports available upon request.
15+ Years Experience
Specialized in electronic connectors since 2009
ISO 9001 Certified
100% quality testing before shipment
Free Engineering Samples
Available for qualified projects
Fast Lead Time
2-4 weeks standard delivery
OEM/ODM Custom
Custom design & manufacturing
Global Service
Serving 50+ countries worldwide
What is the difference between a momentary push switch and a self‑locking (latching) push switch?
What mounting and termination options do Vistar push switches offer?
What is the difference between SPST, SPDT, and DPDT push switches?
What is the typical lifespan of a Vistar push switch?
Are Vistar push switches RoHS and REACH compliant?
Do you offer IP67 waterproof push switches for outdoor applications?
What customization options are available for OEM push switch projects?
What is the MOQ and lead time for push switch orders?
Shenzhen Vistar Electronics Co., Ltd. is a professional push switch manufacturer based in Pingshan District, Shenzhen, China — the global electronics hub. Since 2009, we have specialized in the design, manufacturing, and global supply of electromechanical switching solutions, including push switches, tactile switches, slide switches, rocker switches, and detector switches for OEM and ODM customers in 50+ countries.
Our push switch portfolio covers momentary (spring‑return) and self‑locking (latching) types, with contact configurations SPST, SPDT, and DPDT, supporting N.O. (normally open) and N.C. (normally closed) logic. Mounting styles include DIP through‑hole (maximum mechanical retention), SMT (tape‑and‑reel for automated assembly), right‑angle, vertical, and panel mount (standard or IP67 waterproof). Termination options extend to solder lug, quick connect, and right‑angle PCB pins. Current ratings range from 0.5A to 5A, voltage ratings up to 250V AC / 125V DC, with mechanical life up to 100,000 cycles and an operating temperature range of -40°C to +85°C. Gold‑plated phosphor bronze contacts ensure contact resistance ≤ 100mΩ and corrosion protection for signal‑critical applications.
All Vistar push switches are manufactured under an ISO 9001:2015 certified quality management system, fully compliant with RoHS 3 (EU Directive 2015/863) and REACH SVHC environmental regulations. For comprehensive technical guidance on push switch parameters — including operating force (typ. 3‑10N), total travel (1–4mm depending on series), contact resistance, and dielectric strength — we recommend consulting authoritative industry resources: the CUI Devices push button switch technical library for mounting styles and mechanical specifications, the Knitter‑Switch general pushbutton technical information for contact rating and IP protection benchmarking, and the E‑Switch pushbutton product catalog for circuit configuration comparisons. These references validate Vistar’s alignment with internationally recognized switching specifications and reliability standards.
For a complete interconnect and control solution, explore our related product categories: Tactile Switches, Slide Switches, Rocker Switches, Board‑to‑Board Connectors, USB‑C Connectors, HDMI PCB Connectors, FPC Connectors, Automotive Connectors, and Cable Assemblies.
Contact our sales team for a free sample, technical datasheet, or custom OEM quotation — we respond within 24 hours. ✉️ sales@vistarelectronics.com | 📞 +86 150 1925 5609
