5.8mm Self-Locking Push Switch for Compact PCB Control

The PB-22E60 is a 5.8mm momentary push switch with a right-angle PCB mount orientation, designed for applications where vertical clearance is limited and side-entry control is required. This right angle PCB push switch positions the actuator parallel to the PCB surface, enabling edge-mount installation that saves vertical space in compact electronic equipment.

This 5.8mm push button switch features momentary (non-latching) operation — the switch returns to its normal state when the actuator is released. This makes it suitable for trigger inputs, reset functions, start/stop controls, and other temporary switching applications in consumer electronics, industrial control, and embedded systems.

Manufactured in an ISO 9001:2015 certified facility, this compact right angle switch is fully compliant with RoHS 3 and REACH regulations. Available in bag or tray packaging, with OEM customization options for volume orders.

A 5.8mm momentary push switch provides temporary switching action — the electrical contacts change state only while the actuator is being pressed. When the actuator is released, a spring mechanism returns the switch to its normal (resting) state.

This operating principle is different from a self-locking or latching switch, which maintains its state after actuation. Momentary switches are commonly used for trigger inputs, reset functions, start/stop controls, door interlock sensing, and other applications where the circuit should respond only to a temporary button press.

The PB-22E60 is a 5.8mm momentary push switch with right-angle PCB mounting. It is suitable for applications requiring a compact, side-entry push button for temporary control inputs.

A right angle PCB push switch positions the connector and actuator parallel to the PCB surface, enabling edge-mount installation that reduces vertical height requirements. This orientation is particularly useful in slim devices where vertical clearance is limited.

This right angle PCB push switch design allows engineers to place the switch at the PCB edge with the actuator accessible from the side of the enclosure. This simplifies industrial design and improves cable management by allowing the switch to be accessed from the side rather than the top of the device.

For compact electronic products, the right-angle orientation can make the difference between a feasible PCB layout and one that requires additional board space or component repositioning. The PB-22E60 is specifically designed for these space-constrained applications.

This 5.8mm push button switch is designed with several features that make it suitable for compact electronic equipment.

Key Advantages

• Compact 5.8mm footprint: The small body size allows placement in dense PCB layouts where larger switches cannot fit.
• Right-angle orientation: The side-entry design enables edge-mount installation that saves vertical space.
• Momentary action: Spring-return mechanism ensures the switch returns to its normal state when released.
• PCB integration: Designed for direct PCB mounting with through-hole DIP terminals.
• Reliable operation: Suitable for repeated manual actuation in consumer and industrial applications.

The PB-22E60 is a 5.8mm push button switch that combines compact size with reliable momentary switching for a wide range of electronic products.

A compact right angle switch offers several advantages for PCB designers working on space-constrained electronic devices. The right-angle orientation positions the switch parallel to the PCB surface, enabling edge-mount installation that saves vertical space and simplifies enclosure design.

Typical applications for this compact right angle switch include:

• Control panels with side-entry buttons
• Portable electronic devices where vertical space is limited
• Consumer electronics with compact form factors
• Industrial control interfaces requiring side-mounted controls
• Embedded systems and IoT devices

When selecting a compact right angle switch, engineers should consider the actuator height, PCB edge clearance, and mechanical integration with the enclosure. The PB-22E60 is designed to meet these requirements in a compact 5.8mm package.

Below are the complete specifications for the 5.8mm right angle push switch PB-22E60, covering electrical, mechanical, and environmental ratings.

Electrical and mechanical specifications should be verified against the latest product drawing and engineering documentation before production release. Contact Vistar Electronics for the complete datasheet.

When selecting a push switch for your PCB, understanding the differences between momentary and self-locking operation is essential.

The PB-22E60 is a momentary push switch. Choose this when the circuit should respond only while the button is being pressed. For applications requiring maintained switching, consider a self-locking switch.

When integrating this 5.8mm right angle push switch into a PCB design, several factors should be considered to ensure reliable operation.

Footprint Design

• Use the manufacturer’s recommended land pattern for the PCB footprint.
• Verify terminal spacing and hole diameter from the product drawing.
• Position the connector at the PCB edge with the actuator accessible from the side.

Actuator Clearance

• Ensure sufficient clearance around the actuator for manual operation.
• Allow adequate space for the actuator travel and button operation.
• Verify the actuator does not interfere with adjacent components or the enclosure.

Mechanical Support

• The through-hole mounting provides strong mechanical retention.
• For high-vibration applications, consider additional mechanical support.
• Sample testing is recommended before mass production.

Selecting the right push switch requires consideration of several factors beyond the number of pins and body size.

1. Operating Action

Determine whether your application requires momentary or maintained switching. This 5.8mm momentary push switch is suitable for temporary control inputs.

2. Mounting Orientation

Right-angle is ideal for edge-mount applications where vertical space is limited. Vertical mounting is suitable for top-panel ports.

3. Body Size

The 5.8mm footprint is compact and suitable for high-density PCB layouts. Ensure the body size fits your board space.

4. PCB Footprint

Verify the terminal spacing and footprint from the manufacturer’s drawing before PCB production.

5. Electrical and Mechanical Requirements

Confirm the voltage and current rating, operating force, and expected mechanical life under your application conditions.

Need a different configuration? Explore our full push switch product range.

What Is a 5.8mm Right Angle Push Switch?

A 5.8mm right angle push switch is a compact momentary push button designed for PCB mounting with a 90° side-entry orientation. The PB-22E60 features a 5.8×5.8mm footprint and right-angle PCB mount, providing a space-saving switching solution for electronic equipment where vertical clearance is limited.

This right angle PCB push switch is designed for side-entry control applications where the actuator is accessed from the side of the enclosure rather than the top. This orientation is particularly useful in slim devices, portable electronics, and compact industrial equipment where vertical space is at a premium.

Momentary Operation — How It Works

A 5.8mm momentary push switch uses a spring-return mechanism to maintain its normal state when the actuator is not pressed. When the actuator is pressed, the electrical contacts change state. When released, the spring returns the contacts to their normal position. This provides temporary switching action suitable for trigger inputs, reset functions, and start/stop controls.

This is different from a self-locking switch, which maintains its state after actuation. The choice between momentary and self-locking depends on whether the application requires a temporary or maintained switching action.

Right Angle Orientation — Benefits for PCB Design

The right-angle orientation of this 5.8mm push button switch offers several advantages for PCB designers. The side-entry design positions the actuator parallel to the PCB surface, enabling edge-mount installation that reduces vertical height requirements. This is particularly useful in slim devices where vertical clearance is limited.

For compact electronic products, the right-angle orientation can simplify enclosure design by allowing the switch to be accessed from the side rather than the top of the device. This can improve industrial design and provide more flexibility in component placement.

Applications Across Industries

This compact right angle switch is widely used across multiple industries. Consumer electronics use it for portable devices and remote controls. Industrial control systems use it for control panels and operator interfaces. Instrumentation uses it for test equipment and measurement devices. Audio equipment uses it for mode selection and trigger inputs. Communication equipment and embedded systems also rely on the PB-22E60 for compact side-entry momentary switching.

Why Choose Vistar as Your Push Switch Supplier

Vistar Electronics is a trusted manufacturer and supplier of push switches serving customers in consumer electronics, industrial automation, and embedded systems. Our push switch lineup includes momentary and self-locking configurations with various sizes, orientations, and mounting styles.

With ISO 9001:2015 certification and a commitment to continuous improvement, Vistar is your reliable partner for high-quality switching solutions. For more technical resources, including PCB layout guidelines and switch selection guides, visit our technical blog or contact our engineering support team directly.

Explore our full range of push switches and related content:

• Push Switches — Full Product Collection
• 5.8mm Momentary Push Switch
• Momentary vs Latching Push Switch Guide

When designing a push-button control circuit, engineers should evaluate the mechanical switch together with the complete electrical system. Important parameters include contact configuration, contact resistance, insulation resistance, dielectric strength, operating force, travel, mechanical life, electrical life, and environmental performance.

The CUI Devices technical resources provide useful reference information for push-button switch selection and mechanical characteristics.

For additional switch technology information, engineers can also review the E-Switch pushbutton product resources when comparing circuit configurations and switch construction.