Slide Switch Manufacturer · Shenzhen, China · ISO 9001:2015

Slide Switch Manufacturer – 2 & 3 Position PCB Mount Slide Switches (SPST/SPDT/DPST/DPDT)

Vistar Electronics supplies a complete range of slide switches – SPST, SPDT, DPST and DPDT circuits in 2‑position or 3‑position configurations. Available in SMT, DIP through‑hole, right‑angle, vertical and panel mount termination. Rated 0.5A–5A at up to 125V AC / 30V DC with 10,000 mechanical cycles. Gold‑plated or silver contacts, UL94‑V0 housings. RoHS 3 & REACH compliant. Free samples available for qualified projects.

✅ SPST / SPDT / DPST / DPDT Circuits
✅ 2 Position (ON‑ON) & 3 Position (ON‑OFF‑ON)
✅ SMT / DIP Through‑Hole / Right‑Angle / Vertical
✅ 0.5A–5A Rating
✅ 10,000 Mating Cycles
Quick Filter
Find Your Slide Switches Fast
Filter by Pole
1 Pole (SP)2 Pole (DP)3 Pole (3P)
Filter by Throw / Position
2 Position (2T / ON-ON)3 Position (3T / ON-OFF-ON)4+ PositionDPDT (2P2T)
Filter by Mounting
SMTDIP Through-HoleHorizontalVertical
Filter by Type
Knob / PaddleMiniature
Technical Reference
ParameterSignal‑Grade SeriesPower‑Grade Series
Circuit ConfigurationsSPST / SPDT / SP3TDPST / DPDT / DP3T
Positions2‑position (ON‑ON) / 3‑position (ON‑OFF‑ON)2‑position (ON‑ON) / 3‑position (ON‑OFF‑ON)
Actuator TypeStandard slide knob / flush actuatorExtended slide knob / panel mount lever
Termination StylesSMT / DIP Through‑Hole / Right‑Angle / VerticalDIP Through‑Hole / Right‑Angle / Panel Mount / Solder Lug
Current Rating0.5A3A – 5A
Voltage Rating12V DC – 30V DC125V AC – 250V AC / 30V DC
Contact Resistance≤ 50mΩ (initial)
Insulation Resistance≥ 100MΩ at DC 100V
Dielectric Withstanding Voltage500V AC for 1 minute1000V AC – 1500V AC for 1 minute
Mechanical Life10,000 cycles (min)
Contact MaterialGold‑plated Phosphor Bronze (low‑current signal)Silver‑plated Brass / Copper Alloy
Housing MaterialHigh‑Temp LCP / PBT / PA9T, UL94‑V0
Actuator Travel2.0mm – 4.0mm (depending on series)
Actuator Height OptionsFlush (0mm raised) / Standard (2–5mm) / Extended (6mm+)
Operating Temperature-40°C to +85°C
ComplianceRoHS 3, REACH, ISO 9001:2015
All Products
Slide Switches — Full Product Line
1 2 3 4
Product Features
Slide Switch – Full Circuit & Mounting Flexibility
⚡

Complete Circuit Configurations

Available in SPST, SPDT, SP3T, DPST, DPDT and DP3T circuits – from simple single‑pole on/off switching to complex double‑pole three‑position control. SPDT (3‑pin) and SP3T (4‑pin) for signal routing; DPDT (6‑pin) and DP3T (8‑pin) for motor direction control and dual‑circuit switching.

🔘

2‑Position (ON‑ON) & 3‑Position (ON‑OFF‑ON)

2‑position slide switches provide simple binary switching (ON‑ON) for mode selection between two states. 3‑position slide switches add a centre‑off position (ON‑OFF‑ON) for forward‑off‑reverse motor control, three‑state logic selection, or multi‑function mode switching – widely used in industrial controls and audio equipment.

🏭

SMT / DIP / Right‑Angle / Vertical Mounting

SMT (tape‑and‑reel) for automated pick‑and‑place assembly. DIP Through‑Hole for maximum mechanical retention. Right‑Angle (90°) for edge‑mount PCB access – ideal for handheld devices. Vertical for top‑accessible slide actuators. Panel mount with threaded bushings for front‑panel integration.

🛡️

Gold & Silver Contacts – Low Resistance, High Durability

Gold‑plated phosphor bronze contacts (signal‑grade series) provide ultra‑low contact resistance (≤ 50mΩ) and superior corrosion protection for low‑current digital logic switching. Silver‑plated contacts (power‑grade series) offer higher current carrying capacity (up to 5A) and excellent arc resistance for AC mains switching.

🔩

Positive Detent & Tactile Feedback

Engineered with positive detent mechanisms that provide distinct tactile “click” feedback at each switch position, confirming actuation to the user even behind panel overlays or in high‑vibration environments. Available with shorting (make‑before‑break) or non‑shorting (break‑before‑make) contact options as documented by C&K Switches[reference:5].

✅

RoHS 3, REACH & ISO 9001:2015 Certified

All Vistar slide switches are manufactured under ISO 9001:2015 and fully comply with RoHS 3 (EU Directive 2015/863) and REACH SVHC regulations. Our REACH‑compliant switches contain zero SVHC substances above 0.1% weight threshold, protecting your products from market access barriers and costly recalls[reference:6]. Full compliance certificates available upon request.

Why Choose Vistar
🏭

15+ Years Experience

Specialized in electronic connectors since 2009

✅

ISO 9001 Certified

100% quality testing before shipment

📦

Free Engineering Samples

Available for qualified projects

🚀

Fast Lead Time

2-4 weeks standard delivery

🔧

OEM/ODM Custom

Custom design & manufacturing

🌍

Global Service

Serving 50+ countries worldwide

Industries & Applications
Slide Switch PCB Mount Applications – From Consumer Electronics to Industrial Automation
Consumer ElectronicsPortable radios, multimedia speakers, handheld gaming devices, digital cameras, smart home controllers, wearable fitness trackers
Industrial AutomationPLC control panels, motor direction controls (DPDT reverse circuits), HMI selector switches, conveyor belt direction selectors, test & measurement equipment
Automotive ElectronicsCentral control systems, seat adjustment devices, window controls, in‑vehicle entertainment panels, dashboard mode selectors, sunroof controls[reference:7]
Medical DevicesPatient monitors, diagnostic equipment, portable medical instruments, infusion pump controls, handheld surgical tools[reference:8]
Audio & AV EquipmentGuitar effect pedals, audio mixers, broadcast switchers, equalizer controls, portable recording devices, headphone amplifiers
Telecom & Network EquipmentRouter reset switches, base station interface selectors, communication device mode switches, network test equipment
UAV / Drone SystemsFlight controller mode switches, camera selector switches, payload activation controls[reference:9]
IoT & Smart DevicesSmart sensor mode selectors, edge computing module configuration switches, home automation interface selectors

FAQ
Common Questions
Slide Switch – Frequently Asked Questions
What is the difference between SPST, SPDT and DPDT slide switches?
SPST (Single‑Pole Single‑Throw) controls one circuit with two terminals – simple ON‑OFF switching. SPDT (Single‑Pole Double‑Throw) routes a common input between two separate outputs with three terminals – ideal for mode selection. DPDT (Double‑Pole Double‑Throw) switches two independent circuits simultaneously with six terminals – widely used for motor polarity reversal (forward‑reverse control). Standard circuit configurations are detailed in industry references: SPDT (1P2T, 3‑pin), DPDT (2P2T, 6‑pin), SP3T (1P3T, 4‑pin), and DP3T (2P3T, 8‑pin)[reference:10]. Additional configurations from C&K include DPST, 3PDT, 4PDT and 4P3T functions[reference:11].
What is the difference between 2‑position and 3‑position slide switches?
2‑position slide switches (ON‑ON) provide two stable states – the actuator toggles between two positions, commonly used for simple binary switching (ON/OFF or A/B selection). 3‑position slide switches (ON‑OFF‑ON) provide three states with a centre‑off position – the actuator can be set to left, centre, or right, offering three discrete operational states. Common applications include forward‑off‑reverse motor control, three‑state logic selection (High‑Z / Low / High), and multi‑function mode switching in audio equipment and industrial controls. Ultra‑miniature 3‑position slide switches with SP3T (4‑pin) and DP3T (8‑pin) configurations are also available[reference:12].
What mounting and termination options do Vistar slide switches offer?
We offer SMT (tape‑and‑reel) for automated pick‑and‑place assembly, DIP Through‑Hole for wave soldering and maximum mechanical retention, Right‑Angle (90°) for edge‑mount PCB layouts, Vertical for top‑accessible actuators, and Panel Mount with threaded bushings for front‑panel integration. CUI Devices slide switches are available with 1.27 mm or 2.54 mm pitches and surface mount or through‑hole mounting styles[reference:13].
What is the typical current and voltage rating of Vistar slide switches?
Our signal‑grade series (SPST/SPDT) is rated 0.5A at 12V–30V DC – optimized for microcontroller GPIO inputs, logic‑level switching, and low‑current signal applications. Our power‑grade series (DPST/DPDT) supports 3A–5A at 125V–250V AC / 30V DC – suitable for AC mains switching, motor control, and power distribution. NKK Switches slide switches offer electrical ratings of 0.1A at 30V DC with silver contacts, and 0.4VA at 28V AC/DC with gold contacts[reference:14].
What is the typical lifespan (mating cycles) of a Vistar slide switch?
Our slide switches are rated for a minimum of 10,000 mechanical cycles under standard conditions. This rating is derived from industry specifications for slide switches used in daily‑use consumer and industrial devices. CUI Devices slide switches are rated for up to 10,000 cycles with electrical life spanning 2,000 to 10,000 cycles depending on the series and operating conditions[reference:15][reference:16]. For high‑reliability applications requiring extended life, custom contact materials and enhanced mechanical designs are available.
Are Vistar slide switches RoHS and REACH compliant?
Yes. 100% of Vistar slide switches comply with RoHS 3 (EU Directive 2015/863) and REACH SVHC regulations. Our REACH‑compliant switches are verified to contain zero SVHC substances above the 0.1% weight threshold, protecting your automotive electronics and consumer devices from market access barriers and costly recalls[reference:17]. Carling Technologies slide switches, for example, are RoHS and REACH compliant, confirming that leading manufacturers maintain these certifications[reference:18]. Full compliance certificates and test reports are available upon request.
What is the MOQ and can I get free samples?
Standard MOQ for stock slide switch models is 1,000 pieces per model. Free samples are available for qualified engineering and product development projects. Contact our sales team at sales@vistarelectronics.com with your project details – we respond within 24 hours.
Does Vistar support OEM/ODM customization for slide switches?
Yes. We offer full OEM/ODM customization – including custom actuator colour, actuator height (flush to extended), terminal plating thickness (gold/silver), actuator shape, housing colour, panel mount bushing types, custom packaging, and OEM branding on housings. Contact our engineering team with your specifications – free engineering samples available for qualified projects.

Shenzhen Vistar Electronics Co., Ltd. is a professional slide switch manufacturer based in Pingshan District, Shenzhen, China – the global electronics manufacturing hub. Since 2009, we have specialized in the design, manufacturing, and global supply of electromechanical switching solutions, including slide switches, tactile switches, pushbutton switches, rocker switches, and detector switches for OEM and ODM customers in 50+ countries.

Our slide switch portfolio covers SPST, SPDT, DPST and DPDT circuits in 2‑position (ON‑ON) and 3‑position (ON‑OFF‑ON) configurations. Pin counts include 3‑pin (SPDT), 6‑pin (DPDT), 4‑pin (SP3T), and 8‑pin (DP3T) layouts. Termination styles include SMT (tape‑and‑reel for automated pick‑and‑place), DIP Through‑Hole (wave soldering), Right‑Angle (90°) (edge‑mount), Vertical (top‑accessible), and Panel Mount (front‑panel). Actuator heights range from flush (0mm raised) to extended (6mm+). Current ratings span 0.5A (signal‑grade) to 5A (power‑grade) with voltage ratings up to 125V AC / 30V DC. Mechanical life is rated 10,000 cycles minimum, with gold‑plated or silver‑plated contacts delivering contact resistance ≤ 50mΩ and insulation resistance ≥ 100MΩ at DC 100V. Operating temperature range extends from -40°C to +85°C.

For authoritative technical background, we recommend consulting global industry resources: C&K Switches offers comprehensive slide switch families with positive detent, sealing, and shorting or non‑shorting contacts, providing design flexibility in size, mounting, actuation types, ratings and packages. CUI Devices slide DIP switches feature 1.27 mm or 2.54 mm pitches, 1 to 12 position options, surface mount or through‑hole mounting styles, and operating temperatures from -40°C up to +85°C. These references validate Vistar‘s alignment with internationally recognized switching specifications and reliability standards.

All Vistar slide switches are manufactured under an ISO 9001:2015 certified quality management system, fully compliant with RoHS 3 (EU Directive 2015/863) and REACH SVHC regulations. Our REACH‑compliant switches are verified to contain zero SVHC substances above the 0.1% weight threshold, protecting your electronics from market access barriers and costly recalls.

Explore our related product categories: Tactile Switches, Pushbutton Switches, Rocker Switches, Board‑to‑Board Connectors, USB‑C Connectors, HDMI PCB Connectors, FPC Connectors, and Cable Assemblies.

Contact our sales team for a free sample, technical datasheet, or custom OEM quotation – we respond within 24 hours. ✉️ sales@vistarelectronics.com | 📞 +86 150 1925 5609

Related News

Automotive FPC Connector: 5 Proven Strategies to Boost Reliability in High-Vibration Environments
Apr 15, 2026

Automotive FPC Connector: 5 Proven Strategies to Boost Reliability in High-Vibration Environments

Driven by the global wave of automotive electronics intelligence, FPC (Flexible Printed Circuit) connectors have become indispensable components in modern vehicle electronic systems. According to...

 SMT vs Through-Hole Connectors: Pros and Cons
Apr 09, 2026

SMT vs Through-Hole Connectors: Pros and Cons

In the realm of printed circuit board (PCB) assembly, two mounting technologies stand out as the backbone of electronic manufacturing: Surface Mount Technology (SMT) and...

 USB Type-C vs DisplayPort: Which Connector for Your Application?
Apr 06, 2026

USB Type-C vs DisplayPort: Which Connector for Your Application?

Introduction In modern electronics, embedded systems, and display applications, USB Type-C and DisplayPort are two of the most widely used high-performance digital interfaces. While they...

Request a Quote

    Inquiry for:

    Loading product...