DisplayPort SMT Right Angle Connector — 20 Pin Female PCB Receptacle

This DisplayPort SMT right angle connector is a 20-pin female PCB receptacle designed for compact electronic equipment that requires side-entry DisplayPort connectivity. Its right-angle configuration allows the mating cable to exit parallel to the PCB, making it suitable for monitors, desktop computers, docking stations, industrial displays, embedded systems, and other space-constrained designs.

This 20 pin DisplayPort SMT connector is intended for DisplayPort 1.4 applications and provides the standard 20-pin interface used for high-speed digital video, audio, auxiliary channel communication, and Hot Plug Detect. Engineers can select the right-angle configuration when the DisplayPort port needs to align with a chassis side or rear-panel opening while keeping the connector integrated with the PCB.

Engineered to meet VESA DisplayPort standards, this right angle DisplayPort connector supports HBR3 transmission at 8.1 Gbps per lane across four lanes, delivering total throughput up to 32.4 Gbps. This enables uncompressed 8K resolution at 60Hz, 5K at 60Hz, and 4K at 120Hz with HDR — making it suitable for high-refresh-rate gaming monitors, professional video editing stations, medical imaging displays, and VR/AR headsets.

The right-angle SMT configuration allows engineers to optimize board space in slim-profile devices while maintaining robust mechanical stability. Manufactured in an ISO 9001:2015 certified facility, this DisplayPort 1.4 SMT connector is fully compliant with RoHS 3 and REACH regulations. For comprehensive DisplayPort technical specifications, refer to the VESA DisplayPort Standard documentation.

Below are the complete specifications for the right angle DisplayPort connector DP-F13A, covering electrical, mechanical, and environmental ratings.

Specifications should be verified against the latest product drawing and engineering documentation before production release. Electrical performance depends on the complete system design, including PCB layout, cable assembly, and PHY implementation.

A 20 pin DisplayPort SMT connector provides the standard full-size DisplayPort interface in a surface-mount package suitable for automated PCB assembly. The 20 pins carry the complete DisplayPort signal set — four Main Link differential pairs for high-speed video and audio, the AUX channel for EDID and HDCP communication, Hot Plug Detect, and DP power.

The 20-pin configuration supports the full range of DisplayPort functionality, including Multi-Stream Transport (MST) for daisy-chaining multiple monitors, Display Stream Compression (DSC) for higher resolutions and refresh rates, and backward compatibility with earlier DisplayPort versions. When paired with a compatible DisplayPort 1.4 source and cable, this connector enables 8K@60Hz, 5K@60Hz, and 4K@120Hz video transmission.

The surface-mount termination allows the connector to be integrated into automated reflow soldering processes, reducing assembly steps and improving production consistency. The compact footprint makes this 20 pin DisplayPort SMT connector suitable for high-density PCB layouts where board space is limited.

A right angle DisplayPort connector positions the mating interface parallel to the PCB surface, enabling side-entry cable connections that minimize vertical height requirements. This orientation is particularly useful in slim devices where vertical clearance is limited and in equipment where the DisplayPort port needs to align with a side-panel or rear-panel opening.

The right-angle configuration allows the connector to be placed at the PCB edge with the port opening facing outward. This simplifies enclosure design by allowing the cable to enter from the side rather than the top of the device. For monitors, desktop computers, and docking stations, the right-angle orientation often provides a more natural cable routing path compared to vertical connectors.

When designing with a right angle DisplayPort connector, engineers should consider the PCB edge clearance, connector alignment with the enclosure opening, and the cable bending radius. The connector should be positioned so that the mating cable can be inserted and removed without interference from adjacent components or enclosure walls.

For a comparison of different mounting orientations, see our right-angle vs vertical DisplayPort connector guide.

A DisplayPort 1.4 SMT connector supports the HBR3 (High Bit Rate 3) transmission standard at 8.1 Gbps per lane across four lanes, delivering total bandwidth up to 32.4 Gbps. This enables uncompressed 8K resolution at 60Hz, 5K at 60Hz, and 4K at 120Hz with HDR, making it suitable for next-generation display applications.

The DP-F13A is designed for DisplayPort 1.4 applications including gaming monitors with high refresh rates, professional graphics workstations for video editing and 3D rendering, medical imaging displays, digital signage, and VR/AR headsets. The connector is backward compatible with DisplayPort 1.2, 1.1, and 1.0 devices, automatically negotiating the appropriate link rate and lane configuration.

For protocol-level requirements, engineers should refer to the official VESA DisplayPort standards when validating a DisplayPort interface design. The connector itself provides the physical interface; the actual supported DisplayPort version depends on the source chipset, cable, and sink display.

A right angle DP connector for PCB should be selected according to both electrical and mechanical requirements. The connector needs to align accurately with the enclosure opening while maintaining enough clearance for the mating plug and cable. At the PCB level, the footprint must provide appropriate pads, mounting features, grounding connections, and routing space.

High-speed differential pairs require particular attention during PCB layout. The Main Link lanes should be routed with controlled impedance, matched lengths, and minimal discontinuities. The AUX channel and Hot Plug Detect signals also require appropriate routing to ensure reliable communication between the source and display.

When integrating this right angle DP connector for PCB into your design, consider the following:

• PCB Edge Clearance: Position the connector at the board edge with adequate space for the mating plug and cable bending radius.
• High-Speed Routing: Route Main Link differential pairs with controlled impedance and matched lengths.
• Grounding: Connect the connector shell to the PCB ground plane for effective EMI shielding.
• Mechanical Support: Ensure adequate PCB support for the connector to withstand cable insertion and withdrawal forces.

For a vertical mounting alternative, see our 20-pin vertical DisplayPort connector SMT.

When selecting a DisplayPort connector for your PCB, understanding the differences between right-angle and vertical mounting is essential.

The DP-F13A is a right-angle connector. Choose this when your PCB layout requires a low-profile DisplayPort port with horizontal cable exit. For applications requiring vertical cable exit, consider our 20-pin vertical DisplayPort connector SMT.

What Is a DisplayPort SMT Right Angle Connector?

A DisplayPort SMT right angle connector is a surface-mount DisplayPort receptacle that positions the mating interface parallel to the PCB surface. The DP-F13A is a 20-pin female version designed for compact electronic equipment that requires side-entry DisplayPort connectivity. Its right-angle configuration allows the mating cable to exit parallel to the PCB, making it suitable for monitors, desktop computers, docking stations, industrial displays, embedded systems, and other space-constrained designs.

This 20 pin DisplayPort SMT connector provides the standard full-size DisplayPort interface in a surface-mount package suitable for automated PCB assembly. The 20 pins carry the complete DisplayPort signal set — four Main Link differential pairs for high-speed video and audio, the AUX channel for EDID and HDCP communication, Hot Plug Detect, and DP power.

Right Angle DisplayPort Connector — PCB Mounting Design

A right angle DisplayPort connector positions the mating interface parallel to the PCB surface, enabling side-entry cable connections that minimize vertical height requirements. This orientation is particularly useful in slim devices where vertical clearance is limited and in equipment where the DisplayPort port needs to align with a side-panel or rear-panel opening.

When designing with a right-angle DisplayPort connector, engineers should consider the PCB edge clearance, connector alignment with the enclosure opening, and the cable bending radius. The connector should be positioned so that the mating cable can be inserted and removed without interference from adjacent components or enclosure walls.

DisplayPort 1.4 SMT Connector — High-Speed Display Applications

A DisplayPort 1.4 SMT connector supports HBR3 transmission at 8.1 Gbps per lane across four lanes, delivering total throughput up to 32.4 Gbps. This enables uncompressed 8K resolution at 60Hz, 5K at 60Hz, and 4K at 120Hz with HDR, making it suitable for gaming monitors, professional graphics workstations, medical imaging displays, and VR/AR headsets.

The DP-F13A is backward compatible with DisplayPort 1.2, 1.1, and 1.0 devices, automatically negotiating the appropriate link rate and lane configuration. For protocol-level requirements, engineers should refer to the official VESA DisplayPort standards when validating a DisplayPort interface design.

Applications Across Industries

This right angle DP connector for PCB is widely used across multiple industries. Gaming monitors use it for high-refresh-rate displays. Professional graphics workstations use it for video editing and 3D rendering. Medical imaging systems use it for diagnostic displays. Industrial control panels use it for HMI interfaces. Docking stations and broadcast equipment also rely on the DP-F13A for reliable high-bandwidth video transmission.

Why Choose Vistar as Your DisplayPort Connector Supplier

Vistar Electronics is a trusted manufacturer and supplier of DisplayPort connectors serving customers in consumer electronics, industrial automation, medical devices, and professional AV markets. Our DisplayPort connector lineup includes right-angle, vertical, and mid-mount configurations with SMT and through-hole mounting options.

With ISO 9001:2015 certification and a commitment to continuous improvement, Vistar is your reliable partner for high-quality interconnect solutions. For more technical resources, including PCB layout guidelines and connector selection guides, visit our technical blog or contact our engineering support team directly.

Explore our full range of DisplayPort connectors and related content:

• DisplayPort Connectors — Full Product Collection
• Right Angle vs Vertical DisplayPort Connector Guide
• 20-Pin Vertical DisplayPort Connector SMT — DP-F06B
• DisplayPort 1.4 vs 2.1 — Complete Comparison

For DisplayPort interface design and qualification, engineers should reference the applicable VESA standards together with the requirements of the selected source and sink devices. The following official resources provide useful background information:

• VESA DisplayPort Standard
• European Commission — RoHS Directive
• European Chemicals Agency — REACH

These references are provided for engineering and compliance background. The applicable requirements for the finished equipment should be determined according to the product category, destination market, and customer specifications.