Des: 4 pin DIP Waterproof tactile switch 6*6mm
Part No: TS-1102W
Specification:
Rating: 50mA, DC 12V
Travel: 0.2±0.10mm
Operating force: 180gf/260gf
Operating Life: 50,000/100,000 Cycles
Packaging: Reel/Bag
- Home
- Products
- Tactile Switches
- Waterproof tactile switch 6*6mm
Waterproof tactile switch 6*6mm
Featured Content
Know More About DP Connector
August 7, 2023
DP Connector, DisplayPort (DP) is a digital display interface used to connect video sources, such as computers and gaming consoles, to displays, such as monitors, televisions, and projectors. It was developed by VESA (Video Electronics Standards Association) and first introduced in 2006. DisplayPort supports high-definition video and audio transmission and offers several advantages over other video interfaces, such as VGA and DVI. These advantages include: DisplayPort has undergone several revisions since its introduction, with each new version offering additional features and capabilities. The latest version, DisplayPort 2.0, was introduced in
About Slide Switches: all you should know 3 points clearly
April 18, 2025
Various technologies can be used to regulate the amount of current in a circuit, and slide switches are among the most widely used solutions. Slide switches provide a compact and reliable way to control circuits, connecting or disconnecting them with a simple linear sliding motion. This brief technical review will examine how slide switches work, explore their main configurations, and outline the electrical and mechanical considerations for optimal selection. Basics of Slide Switches A slide switch is an electromechanical component that controls a circuit by moving a linear sliding mechanism.
The basic performance of electronic connector
January 2, 2025
The basic performance of electronic connector can be divided into three major categories: mechanical performance, electrical performance and environmental performance. 1. Mechanical properties In terms of connection function, plugging and unplugging force is an important mechanical property. Plug-in force is divided into insertion force and extraction force, and the requirements for the two are different. There are regulations on the maximum insertion force and the minimum separation force in relevant standards, which shows that the insertion force should be small, and if the separation force is too small, it will