Des: 6mm Waterproof tact switch SMD 4 pin tactile switch 6×6
Part No: TS-1102SW
Specification:
Rating: 50mA, DC 12V
Travel: 0.2±0.10mm
Operating force: 180gf/260gf
Operating Life: 50,000/100,000 Cycles
Packaging: Reel/Bag
- Home
- Products
- Tactile Switches
- 6mm Waterproof tact switch SMD 4pin
6mm Waterproof tact switch SMD 4pin
Featured Content
FPC connectors: you’d better to know 2024
April 7, 2024
FPC connectors are a type of electrical connector used to establish a reliable and flexible connection between a flexible printed circuit board and other electronic components or devices. Many pitches are available, such as 0.3 mm, 0.5 mm, 1.00 mm, 1.25 mm, 2.54 mm, but the most common pitches are 0.500 mm, 1.00 mm, and 1.25 mm. A single FFC can have different pitches between different conductors on the same cable, however this is uncommon. There are 0.3mm pitch, 0.5mm and 1.0mm pitch zif/non-zif types FPC Connectors with different heights
DisplayPort connector informations
July 12, 2023
The DP interface is “DisplayPort”, and DisplayPort is a display interface published by the Video Electronics Standards Association (VESA). As the successor to DVI, DisplayPort will add support for high-definition audio signal transmission while transmitting video signals, while also supporting 8K resolution. There are DisplayPort connectors and Mini DisplayPort connector (receptacle and plug) Vistar Electronics manufacturing Clearly the mini DisplayPort connector uses a physically different connector it shares with Thunderbolt 1 or 2 and has no locking mechanisms like a full size DisplayPort jack and plug offer. Not that every
How Does Tact Switch Work ?
March 4, 2025
The work principle of tact switch can be divided into the following four parts: