Des: 6Pin Slide switch DpDt DIP horizontal
Part No: SK-22F06
Specification:
Rating: 0.3A, DC 50V
Function: 2P2T
Operating Life: 10,000 Cycles
Packaging: Bag/Tray
- Home
- Products
- Horizontal Slide Switch
- 6Pin Slide switch DpDt SK-22F06
6Pin Slide switch DpDt SK-22F06
Featured Content
What are the interface specifications of the Headphone Jack ?
January 9, 2025
The headphone Jack female is a functional electronic switch that is a standard part. When in use, gently press the switch button to turn the switch on, and when you release your hand, the switch will be turned off. The internal structure of the headphone socket is a quasi-metallic shrapnel that is forced to spring to complete the opening and closing. Headphone sockets are widely used in electrical appliances due to their small contact resistance, crisp and clear touch when pressed, and complete height specifications. Headphone jack socket interface specifications:The
How to choose USB-C Connectors(USB4.0, USB3.2, USB3.1 and USB2.0 | 24/16/12/9/6 Pin) For Your products?
July 22, 2025
USB-C Connector is gradually replacing USB-A, and product selection needs to pay attention to these In the past decade, many connectors in the field of consumer electronics have been replaced by USB-C Connectors in the integration. But how difficult is it for USB-C Female Connector to be “universal” for terminals? The 3.5mm audio interface gradually disappeared from mobile phones, and the Lightning interface on the iPhone and the Micro-USB interface on domestic mobile phones were gradually replaced by USB-C. For terminals, can USB-C connectors really meet the requirements of “universal
The basic performance of electronic connector
January 2, 2025
The basic performance of electronic connector can be divided into three major categories: mechanical performance, electrical performance and environmental performance. 1. Mechanical properties In terms of connection function, plugging and unplugging force is an important mechanical property. Plug-in force is divided into insertion force and extraction force, and the requirements for the two are different. There are regulations on the maximum insertion force and the minimum separation force in relevant standards, which shows that the insertion force should be small, and if the separation force is too small, it will